Reference: IND02841
Brand: PAINTO
Paper tape with aluminum insert 50 mm/30 m
favorite favorite_borderTape to protect the corners of plasterboards.
Plasterboard for use in construction inside buildings.
The board is intended for use in rooms where the relative humidity does not exceed 70%. It has a cardboard-covered and flattened long edge of Norgips S and an evenly cut short edge. This board is most often used in interior drywall systems. It can be used to make wall and ceiling linings, partition and curtain walls, suspended ceilings and attic structures.
Norgips S edge - flattened edge. This edge makes it possible to obtain a smooth surface at the connection of plasterboards. A slight flattening reduces the wear of the filler in the joint. Connections with the Norgips S edge require reinforcement with reinforcement tapes.
Application:
Plasterboard for use in construction inside buildings. Used for all kinds of buildings and for use in drywall systems used in rooms with a relative humidity of not more than 70%. The board is used as sheathing for suspended ceilings, attic cladding and wall cladding.
Standard: PN-EN 520+A1:2012 “Gypsum boards. Definitions, requirements and test methods”.
Reference: IND02841
Brand: PAINTO
Tape to protect the corners of plasterboards.
Reference: IND15993
Brand: STABILL
STABILL gypsum mounting adhesive
Reference: IND02332
Brand: WKRĘT-MET
Screw for fixing plasterboards to wooden substrates.
Reference: IND04590
Brand: ARTMET
Fixing rod with eyelet.
Reference: IND10472
Brand: ARTMET
Angle bar for the UA-100 profile
Reference: IND17891
Brand: Steela
PROFIL U- 50/4MB (POZIOMY)STEE
Reference: IND17889
Brand: Steela
PROFIL C- 75/2.6MB (PIONO)STEE
Reference: IND00363
Brand: Steela
PROFIL UD-27/4MB STEELA