Atlas Un-Grunt Color 5l

Very short drying time - depending on the temperature conditions and humidity, the application of new layers on a primed surface is already possible after:

- after 15 minutes - applies to adhesive mortars and Atlas plasters

- After 2 hours - it applies to self -leveling floors and foundations, strokes and paints.

• It strengthens the surface soil mineral substrates - it penetrates the structure of the material, strengthens it and improves its load capacity.

• Increases the efficiency of paints, coats and adhesives - sealing the structure of the ground ground, increases the efficiency of the materials used to make the next layer, reduces consumption.

• Facilitates the application of subsequent layers - painting coatings, glues, coats and putty, sleepers and self -leveling floors, carpet glues, wallpaper glue, glue for thermal insulation for substrates, etc.

• Limits the absorbency of the substrate - prevents "pulling" excessive amount of water from a product applied to primed substrates: cement sleepers with or without underfloor heating, various types of plasters, etc.

• unifies the absorbency of the ground - the product applied in the next layer has the same binding conditions over the entire surface, including places where local repairs were made.

• binds loose particles on the surface - limits the dusting of floors and flooring and plasters.

• intended for application at increased temperature - recommended for use in the range from 5 ° C to 30 ° C, inside and outside the buildings.

• For applying with a roller, brush or spraying method.

• A specially selected pigment coloring the ground, enabling the control of the progress of work, both when the soil is still wet, as well as when it dries - the obtained color does not reduce the capacity of painting coatings.

Available packages: 5 kg and 10 kg canisters.