Zdjęcia produktów i wzorniki kolorów są wyłącznie poglądowe
Reference: IND04910
Brand: AJKA
"WOOD" bench 190
favorite favorite_borderA brush designed for painting large surfaces.
Zdjęcia produktów i wzorniki kolorów są wyłącznie poglądowe
Silicone agent for impregnation of paving stones.
SARSIL® cobblestone
Silicone agent for impregnation of paving stones,
is a solution of silicone compounds in a solvent.
perfectly impregnates the paving stone surface, giving it hydrophobic properties,
penetrates the substrate, creating a protective layer, resistant to weather conditions,
UV radiation and many chemical agents,
retains the "breathing" properties of the material,
reduces the tendency to get dirty and facilitates self-cleaning of paving stones under the influence of precipitation,
increases frost resistance,
refines surfaces and intensifies color,
prevents overgrowing with mosses and lichens,
reduces salt efflorescence and prevents its formation.
TECHNICAL DATA
Appearance Homogeneous liquid with a light straw color
Dilution ready for direct use
Density at 20°C approx. 0.85 g/ml
Viscosity at 20°C according to Ford cup No. 4 approx. 11 s
DESTINY
SARSIL® pavement is a modern hydrophobic silicone preparation designed to protect the surface made of cobblestones (both new and used) around the house, in places such as: gas stations, shops, car parks, pedestrian routes, etc. aesthetic is indicated
and her impeccable appearance.
The impregnation applied to the paving stone surface penetrates deeply and evenly into its structure, creating a durable and stable protection. It revives the color of the cube dyed in the mass, preserving the natural structure of the material. It strengthens and protects the paving stone against water soaking, extending its durability, increases frost resistance and facilitates the removal of various types of impurities from the surface.
The impregnated cube retains its durability and aesthetic, fresh look for a long time.
USE
Substrate preparation
The paving stone intended for impregnation should be thoroughly cleaned of dirt, salt and other impurities with water.
In the case of hard-to-remove dirt, it is recommended to use the chemical agent Sarsil® cobblestone cleaner, which should be used in the appropriate dilution with water in the proportions specified on the label or in the technical data sheet of this product. The block intended for impregnation must be completely dry. SARSIL® pavement should be applied in dry, rainless weather at a temperature of +5 to +30°C. The surface obtains full hydrophobic properties after approx. 24 hours. During this time, it should be protected from rain and dirt. The surface of the paving stone with sprinkles (with the addition of rock aggregate) should be impregnated after a prior test. It is recommended to impregnate freshly laid paving stones after the seasoning period (not less than one month).
APPLICATION
Impregnation can be done by brush, roller or spray.
It is recommended to impregnate twice in short intervals using the "wet on wet" method. Apply the second layer
depending on the ambient temperature, no later than after 30 minutes, i.e. as long as the surface is still wet.
The surface should be saturated thoroughly and evenly.
Reference: IND04910
Brand: AJKA
A brush designed for painting large surfaces.
Reference: IND07692
Brand: SCHMITH
Cobblestone cleaning brush. unbound.
Reference: IND00989
Brand: FARKOM
Cleaner for concrete and ceramic surfaces.
Reference: IND05354
Brand: FARKOM
Impregnate for structural wood.
Reference: IND15236
Brand: AKSIL
KOLORBRUK coloring impregnation for paving stones and concrete.
Reference: IND06153
Brand: TYTAN
IMPREG.TYTAN NW A1 SUPER KONC.
Reference: IND02230
Brand: BEKO
Universal agent for wood and stone impregnation.